Crafting chair slipcovers is a very inexpensive and simple method to brighten up an old, obsolete or damaged chair, and it also allows you to adapt the chair’s design to the whole of the room’s décor.
Slipcovers may be purchased for a reasonable price (typically between $20 and $150 based on the chair’s conditions and dimensions), but they’re also not hard to create yourself.
Surprised to hear that? Don’t be. But what we have here for you will surprise you – your quick guide on How to Make a Slipcover for a Chair. Read on to learn more!
Table of Contents
Why Should You Make a Slipcover for a Chair?
There are several reasons for making a slipcover for a chair. But the following are some of the main ones that will prompt you into making one right now:
- Slipcovers mismatched furniture
- The Slipcovers add protection to your chairs
- Slipcovers are ideal for rocking chairs
- Slipcovers are much easier to clean
How to Make a Slipcover for a Chair (Step-by-Step Procedure)
- Measure Your Chair
To manufacture a fabric slipcover customized to the shape of your chair, start by obtaining and writing down accurate measurements of the chair’s dimensions. The following is a list of the measurements you’ll need to take:
- The chair’s backrest elevation.
- The breadth of the chair’s backrest at its broadest point.
- The diameter of the chair’s back.
- The distance between the seat and the top of the back.
- Arm length is the measurement of how long a person’s arms are.
- The distance between the arms and the ground.
- The length between the arms and the chair.
- The seat’s height.
- The seat’s breadth.
- The seat cushion’s thickness.
- The distance between the ground and the lowest cloth edge (if you plan to include a skirt on your slipcover).
- The length around the seat’s base perimeter (if you plan to include a skirt).
- Pick Out the Fabric for Your Slipcover
Select the material for your slipcover. Ensure you have adequate fabric to meet your chair’s dimensions (plus a little extra for hemming and mistakes).
- Choose a reasonably strong fabric for best longevity, such as denim, heavier cotton/hemp mixes, linen, or twill.
- Fabric is available in a broad range of widths, including 36 inches, 42 inches, 60 inches, and even over 100 inches. It’s better to pick one of the broader lengths (60 inches or more) for slipcovers since the bigger the cloth, the less and less you’ll have to sew different clothing items altogether.
- Although a few chairs are larger than others, a basic armchair will require around four to six yards of 60-inch-wide cloth.
- Buy Tracing Paper
To create the first design for your slipcover, you’ll require tracing paper. Freezing paper, Swedish tracing material, and proctored exam table paper seem to be the most frequent types of paper used for pattern tracing.
- Freezer paper is cheap and sufficiently thick not to break easily, but it is also more difficult to see through.
- Swedish tracing paper is simple to be seen through and does not break easily, although it is rather pricey.
- Medical exam table material is affordable and simple to look through, but it’s also lighter and prone to wrinkles.
- Outline of Every Section of the Chair
When assembling the slipcover, it’s critical to transfer the design for each portion of the chair onto a drawing sheet. If you don’t use a precisely traced pattern, you’ll wind up with an inaccurate and ill-fitting cover.
- On your drawing sheet, begin by sketching the back, front, backrest, and armrests of your seat. Comparing your tracings to the initial measurements you collected for reference would help.
- If you would like to add a skirt to the chair, you can design a template for it on lined paper. You’ll need a piece of cloth long enough to wrap around the chair’s base and broad enough to dangle from the chair’s base to the ground.
- Vacuum the Chair
The chair should be vacuumed. Even though the slipcover will ultimately wrap the chair fully, it’s still a good idea to wash it first to remove any dirt or dust.
- When you don’t wash the seat prior to wrapping it, it may get moldy once the slipcover is applied.
- Cut Out the Patterns
Start cutting out every design once you’ve drawn each chair component onto your drawing sheet. Leave a 1-inch seam allowance and a 2-inch hemline allowance. By stitching the parts together, creates a seam allowance.
- Cut out the sheet designs for your chair with scissors and an X-acto knife.
- Trace the Patterns onto Your Fabric
To start, spread your cloth out with the bad side facing up. Arrange your paper pieces on the cloth so that they would all overlap.
- Draw the border of every component with a pencil, then cut out the patterns with cloth cutters.
- Join the Front and Arm Pieces
When you’ve cut out each piece of cloth, put the sharing edges together and stitch the seams in order.
Hook and stitch the front-of-chair cut-out to every one of the arm cut-outs in which they would naturally connect.
- Join the Back and Front Pieces
Attach the rear component to the component from the previous stage (which consists of the front panel and arms). Then, following the seams you’ve marked, stitch the pieces together.
It would help if you had a piece of stretchy cloth that drapes over the backrest and armrests of your chair when you’re finished.
- Join the Seat and Bottom Pieces
Attach the edges of the chair part to what you’ve previously put together. Stitch the seams together.
- Sew the Skirt
Hook the piece of skirt fabric to the chair’s seat and stitch it in position.
It should be hung close to the ground but not pooling on it.
If at all feasible, place the location in which the skirt fabric spans over itself in the rear of the slipcover, out of sight.
- Pull the New Slipcover Over the Chair
Fold the slipcover’s edges into the seat’s padding and armrests.
Sit down carefully; your slipcover should feel comfy and effortlessly accommodate your body’s weight. If it doesn’t, you’ll probably have to pull out and re-sew any seams which aren’t fitting properly.
The Final Verdict
Hopefully, you will be ready to make a slipcover for your chair soon by now. This How to Make a Slipcover for a Chair blog entails the most easier and straightforward method to make one for your chair. Slipcovers protect your chairs. They add to the décor of your furnishings and keep them from catching dust.
You Can Read More
Leave a Reply
You must be logged in to post a comment.