Rolling office chairs are best for allowing you to move around your table quickly. However, when your office chair wheels stop working well, the chair moves from being a comfort zone to a spar. The wheels mainly stop working because they become obstructed with hair, dust, and other scraps.
So, if you find that your office chair is no longer moving evenly across the floor, it’s time to clean the wheels. The office chair wheels gather dirt and build up debris gradually, so to keep your chair rolling smoothly, you’ll require cleaning the wheels thoroughly. Searching out what it takes to clean office chair wheels can be daunting.
Fortunately, it’s not a difficult task to return your chair to a pleasant piece of furniture as it was before. Here in this guide, we will share some steps about how to clean office chair wheels.
Types of Office Chair Wheels
- Single wheel caster:
The single-wheel caster has a simple style, providing swivel and rolling movement. These office chair wheels have a low surface area, attracting less dust and hair. However, if any hair or dirt is stuck near the screw of the wheel, it becomes burdensome to remove as you get minimal space to clean the area.
- Dual Caster wheels:
Dual caster wheels are most widely used as they can hold more weight. These wheels are more prone to attract dust and hair, and it’s strenuous to remove debris from them as the hair gets twisted between both wheels.
- Rolling ball caster wheels:
These wheels are less likely to catch hair and dirt, but the possible area is around the screw. Further, hair and dirt can easily stick to the ball caster if any sticky substance is on the caster surface. Although rolling ball caster wheels don’t attract much hair, they massively allure dirt.
- Non-hooded caster:
The non-hooded caster has a holder fender covering the wheel, so it doesn’t easily collect dirt, dust, and hair. Moreover, you can comfortably wipe the wheels with a rag as they don’t catch hair.
What Tools are Required to Clean the Office Chair Wheels?
You need the following tools for cleaning the office chair wheels:
- A needle:
Take a long needle for removing hair, dirt, and debris from the wheels.
- A razor blade:
A razor blade is a crucial element as it can cut threads and hair stuck into your casters.
- Two screwdrivers:
Buy two strong screwdrivers, as you will have to apply some force through them while opening the nuts of wheels. If you use light screwdrivers, they might get crooked. Moreover, try to buy flathead screwdrivers as they are more robust.
How to Clean Office Chair Wheels (Step-by-Step)
So here are some easy steps about how to clean dirty chair wheels.
First, you need to cover the area with a plastic sheet before cleaning the wheels. Then, you’ll require taking your chair upside down to get convenient access to the wheels. Most standard office chairs are lightweight so that you can do them alone by yourself.
But in case your office chair is heavier, you can take help from any other person.
Now hold a caster in one hand and the chair’s base in another. After it, start drawing each of the casters out – it takes a little bit of your force and power. Casters usually have a grip ring in the stems that keep them in their places, so you’ve to pull the casters out gently.
However, if casters don’t come out, then make an effort to rotate them around. So, applying force through different angles can make it easy by giving you more resistance to bring the caster out.
In this step, you’ve to dismantle the caster wheels by using two screwdrivers. All you require is to grab the wheel and one screwdriver under the axle, then make a force and slightly push it out.
After it, take another screwdriver and place it through the other side of the axle. Now hold both screwdrivers, use your force to twist it, and pull it up so one side of the wheel hits on.
After cracking the casters open, you’ll observe lots of hair, dust, debris, and threads attached to the wheels. Now the cleaning process of chair wheels has started! Initially, you need to use your fingers to take out as much dust as you can.
However, if you notice that threads and hair don’t take off, use a razor blade. It can lift off most of the strings and hair, slide down, and cut the threads gently. Further, if you see that some areas contain debris and you can’t make them with the blade and your fingers, take a needle to help you.
So after cleaning one side, it’s time to observe the other side of the wheel. It’s pretty simple – push the wheel out by using a screwdriver. When it gets out, do the same cleaning process as you did in the previous step.
In this step, you need to wash the caster wheels thoroughly with water. It can help you remove all the remaining dust and dirt on your wheels. While you splash water on the caster wheels, you need to notice that dirty water is coming off from them.
Further, keep splashing water on the casters until they get clean. After it, let the caster wheels dry properly, and then use some Vaseline to lubricate the axle wheel to spin well. Now place the wheels back together and then reaffix them to the base of your chair.
How to Remove Hair and Other Debris From the Wheels Without Disassembling Them?
1st Method: Use knife and duct tape
Take a duct tape and cut it into a piece, then make a loop keeping the adhering part outside. After it, wrap it around the knife, and it looks like a dirt magnet. Now, put the knife to the tangled hair and try to stick hair into the knife and slightly pluck them.
2nd Method: Use Tweezer and Nail Cutter
First of all, you can use a tweezer to pluck much hair as you can. Moreover, you can use duct tape to stick and strip the hair from the wheels. However, if your tweezer can’t go ahead with the hair – use a bottle opener or a nail cutter. The bottle opener is curvy in shape, efficiently removing the tangled hair.
3rd Method: Go for DRANO
A DRANO is the best option to remove hair and dirt from the chair’s wheels. You might think that it’s a cleaner used for hair-clogged pipes, so how can it remove debris from wheels? It can easily remove dirt from the office chair casters without damaging the plastic.
All you’ve to do is place DRANO in a bucket full of water and meld the caster wheels inside the solution for 3-4 hours. In this way, all the hair and debris will dissolve in water.
Caution: DRANO is a corrosive material, so you must handle it carefully and do the cleaning process outdoors. Moreover, remember not to touch DRANO with bare hands.
4th Method: Use a Flame Torch
A flame torch can work like magic if you don’t want to pull apart the caster wheels. So, take a medium size flame torch and burn the hair under caster wheels with flame.
However, you must consider using short bursts of flame as blasting flame for a prolonged period can ruin the wheels, so use flame until the hair starts smoking. Repeat the method while revolving the wheels till you completely burn all hair. Moreover, remember not to use this process on wheels having plastic parts as it can melt and ultimately damage them.
Some Tips to Keep Office Chair Wheels Clean
- You should check the wheels regularly and clean them every six months. In this way, there’ll be less dirt and debris to remove.
- You must use a chair mat underneath your table or chair as it can help your ease of movement around the table area and impede build-up in the wheels.
- Mostly rolling chairs are universal, so if you don’t want to clean the wheels of your chair – you can purchase a new set of wheels to replace the current ones.
- Many lubricants can attract debris and dirt, but some don’t at all. So, if your chair wheels have metal-to-metal contact – go for a greaseless lubricant. However, if your wheels are made of plastic, you can use a silicone lubricant as it will work best for them.
If your office chair gets stuck, what can you do? It can be due to some tangled hair, a paper clip, or it may be due to years of dirt and debris that you have ignored to clean off the wheels.
The caster wheels of your chair are crucial parts, and without them, you can’t be able to move around your office as quickly as you want to. So in this article, we’ve shared some methods about how to clean office chair wheels. Consider our tips and suggestions to get your caster wheels’ as clean as possible.
You Can Also Read